Meteor75 PRO CRSF/ELRS/Frsky
Meteor75 Pro má 45mm vrtule, což z něho dělá největší 1s whoop na trhu. Silné 1102 22000kv motory dělají z meteora bestii.
- The upgraded frame that fits 45mm props perfectly makes Meteor75 Pro the largest 1S whoop drone. Powered with 1102 22000KV motors, it performs smoothly in the air and is maneuverable for freestyle tricks.
- It features a roomier battery slot that can accommodate a bigger battery such as BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter.
- Built-in 1.45g ultralight weight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones.
Adopt with injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.
- Equipped with F4 1S 5A flight controller (Serial ELRS 2.4G or SPI Frsky). The ELRS 2.4G RX version comes with the default ELRS V2.0 firmware and supports being upgraded to ELRS V3.0 separately without flashing Betaflight flight controller firmware. The SPI Frsky version can be also used as the PNP version to connect external receivers due to the two UART ports on the board.
- The various colors of the spare parts including the Meteor75 Pro frame and micro canopy, offer pilots more choices. Using them with BETAFPV waterslide decals, pilots can easily DIY and build their unique whoop drones.
- Meteor75 Pro Brushless Whoop Quadcopter
- Motory: 1102 22000KV Motor
- Baterie: BT2.0 550mAh 1S Battery
- Rám: Meteor75 Pro Brushless Whoop Frame
- Vrtule: Gemfan 45mm 3-Blade Propellers
- Kamera: C03 FPV Camera
- Tilt: 30°/20°
- Canopy: Canopy for Micro Camera 2022 version
- FC&ESC: F4 1S 5A FC (Serial ELRS 2.4G) V2.0/F4 1S 5A FC (SPI Frsky) V3.0
- Receiver Option: ELRS2.4G, Frsky/PNP, TBS Crossfire
- VTX: M03 25-350mW VTX
- Čas letu okolo 6min
- 1 * Meteor75 Pro Brushless Whoop Quadcopter
- 2 * BT2.0 550mAh 1S Battery
- 1 * Type-C USB Cable
- 1 * BT2.0 Battery Charger and Voltage Tester
- 4 * 45mm 3-Blade Props (1.5mm Shaft)
- 1 * Screwdriver
- 1 * Pack of Screws
- 1 * Accessories for Canopy